NOVEC 1230 is the next generation of
chemical fire suppressant in place of FM200
which was a market leader for the exchange
of Halon. NOVEC 1230 and its use in
marine applications is approved by a number
of marine agencies around the world and has
been fully tested in accordance with the
International Maritime Organisation MSC/Circ.848
on revised guidelines for the approval of
fixed gas fire extinguishing systems, as
referred to in SOLAS 74 for machinery spaces
and cargo pump-rooms.
3M Novec 1230 fire protection fluid is a next-generation halon alternative designed to balance industry concerns for performance, human safety and the environment, which makes Novec 1230 fluid the first option to non-sustainable technologies:
•Zero ozone depletion potential
•5-day atmospheric lifetime
•A global warming potential of 1
3M Novec 1230 fire protection fluid offers a number of important advantages over other clean agents and CO2 in marine applications.
Its low acute toxicity, combined with high extinguishing efficiency, give Novec 1230 fluid a significant margin of safety, even at relatively high extinguishing concentrations, making Novec 1230 fluid ideal for occupied spaces including
•Engine and pump rooms
•Communication and control centers
•Saves space and weight
•Allows flexibility in design
•No restriction of shipping
3M Novec 1230 fire protection fluid is a highly efficient extinguishing agent that:
•Is non-corrosive and electrically non-conductive, so it will not harm delicate electronics, radar, navigation and other equipment
•Evaporates quickly and completely
•Leaves no residue
•Can be safely used on energized equipment, helping to ensure continuity of operations during a fire emergency
Registrations and Certifications:
Fire protection systems incorporating 3M Novec 1230 fire protection fluid, developed and sold by leading systems manufacturers, have been registered and certified by a growing number of marine approval authorities:
LRS Type Approval
DNV Type Approval
Bureau Veritas Type Approval
UK Module B
Polish Registry of Shipping
Australian Coast Guard
Marine Marchand Approval
Dutch Shipping Authority
Acceptance, Inland & Sea
Belgium - Inland and Seagoing
Icelandic Registry of Shipping
American Bureau of Shipping
Canadian Coast Guard
Korean Registry of Shipping
U.S. Coast Guard
Five-day atmospheric lifetime
Global Warming Potential of 1
This environmental profile is unmatched by
any other halogenated agent, and helps make
3M Novec 1230 fire protection fluid
today's long-term solution for protecting
your high value assets.
Despite having a high boiling point, NovecTM 1230 is able to be
effectively vapourised over a wide range of hazard temperatures.
It is therefore available to protect most hazards traditionally
protected with Halon 1301 and will be particularly important in
Marine applications and others where high margins of safety and
long term sustainability are considered to be crucial features.
The physical properties of each
halon alternative determines how much agent is required to
provide an equivalent level of protection. NovecTM 1230 will
require approximately twice as much agent by weight as the
equivalent halon system, although end use design
concentrations will be similar, resulting in minimal increases in
storage space for the containers.
One of the advantages offered by NovecTM 1230’s high boiling
point is that it produces a very low vapour pressure, enabling it to
be transported in lightweight totes or drums as opposed to steel
pressurised containers. This allows NovecTM 1230 to be readily air
freighted and as both initial filling and recharging operations are
possible by simply pouring the fluid into containers, prior to
the filling operation is far simpler than with traditional
high pressure gases.
Existing pipework may need to be replaced or supplemented,
although the exact requirement for any particular system can
only be determined after a detailed review of the existing
DECOMMISSIONING A HALON SYSTEM Decommissioning is a Two Step Process
Decommissioning a Halon system from service is usually a two-step process. The first step, field decommissioning, takes place at the site where the fire protection system is located. During this step, the Halon cylinders are disconnected from the system hardware such as manifolds and piping. The second step usually takes place offsite and involves reclaiming the Halon agent from the removed cylinders.
Purpose of Decommissioning
Decommissioning is undertaken to remove the existing Halon system from service, replace the Halon system with an alternative means of fire protection, and/or recover the Halon from the system so it can be made available for use in other applications. As Halon supplies become increasingly scarce, decommissioned Halon supplies will be an important source to meet the future fire protection needs of critical applications.
Who Should Perform Decommissioning
Proper decommissioning procedures are required to assure that vital Halon resources are not inadvertently discharged into the atmosphere during the recovery process and to maintain a safe working environment for individuals involved in the decommissioning process. Accordingly, the decommissioning of Halon systems should only be performed by properly trained personnel.
Immediate free quote
Contact us for an immediate free quote.
Our quality is certified
Gielle makes its products inaccordance with UNI EN ISO 9001, UNI EN ISO 14001,
SA8000:2001 certified quality standards
In accordance with established maritime standards
Gielle’s systems solutions have been tested and approved by marine regulatory agencies throughout the world.
Worldwide installation and service.
No matter where your vessel puts into port. From
New York to Dubai, we perform whatever service is necessary including installation,
retrofit, recharge, maintenance and
It's our global commitment to keeping your Gielle systems functioning perfectly and in
accordance with applicable Marine fire protection regulations.
The right approvals and certifications.
Gielle Fire Systems' products carry an impressive range of Type
Approvals and Flag Administration Approvals.
System design, installation & service
Gielle can provide the services (design and installation, retrofit, recharge,
an d maintenance) necessary to keep your system functioning
properly and in compliance with all applicable
Marine fire protection regulations.
We provide complete stationary and mobile fire
protection solutions from risk analysis via technical design to
Gielle is the leading fullservice
provider for fire protection in Europe and one of
the leading companies worldwide.
Marine, naval and offshore fire protection
Products from the Gielle Fire Suppression have been
developed to meet not only the needs of today, but to also
comply with evolving marine requirements, including
environmental issues, local regulations and more. To every
extent possible, we engineer the ability to upgrade our
equipment directly into our product lines. In many cases, this
gives owners the ability to avoid entire system replacements
when conditions change. Each design innovation is supported
by such important services as ongoing safety documentation.
Immediate free quote
Contact us for an immediate free quote.